[...] There you will find 44719 more Infos: blog.vimagic.de/2008/06/09/nike-langstrumpfs-lauf-liga/ [...]…

Stanley Lee from Spiruline bio 

MFG aus Celle

Hinnerk

ich find den NN3 MK2 immer noch klasse. Für mich ist da vor allem das kleine Packmaß (samt geringem Gewicht) entscheidend. Dafür erkaufe ich mir einige Nachteile (allem voran, dass ich mit meiner D200 auf Grund der Größe der Kamera nicht ganz auf 360*180° komme, da ich nicht direkt nach oben fotografieren kann).
Der Ultimate R1 wäre mir zu einschränkend (nur Single-Row mit Fish-Eye). Ich wäre da eher zum NN5 tendiert, damit ich noch größere Panos (z.B. mit dem 70-200) machen könnte.

cheeers,
-tmb

liebe güße…

dann heißt dass, sie darf den von uns gegebenen Namen (Bird bath) behalten? Coool.
Danke für die Info!

Grüße,
Anne

nach den Fotos und der Beschreibung habt ihr nicht die Prana geklettert sondern eine namenlose Route neben der Remember… Die Prana ist noch eins weiter links und die 6b+ aus dem Topo passt da auch ganz gut.

grüße

This webpage is not available
The webpage at http://blog.vimagic.de/wordpress/wp-comments-post.php might be temporarily down or it may have moved permanently to a new web address.
Error 101 (net::ERR_CONNECTION_RESET): Unknown error.

Anyway, just wanted to let you know I got the code working from within the template. You can see it in action on my blog. :)

Thanks so much!

the plugin needs to be called on a “per picture” basis. you can use it in templates, but unless all you images have the same name it’s probably not going to be much use that way.

or maybe i didn’t quite understand your question :)
cheers,
-tmb

I’d like to be able to share the lens model with my readers on my attachment pages:

http://www.kevinandamanda.com/whatsnew/vacations/running-around-nyc.html/attachment/nyc-dessert-crawl-01

Thanks so much! :)

Details gibt es natürlich nicht. Aber den Links zufolge (welche den Screening Process leider nicht überlebt haben), interessiert Dich das eh nicht ;-) Falls doch, einfach mal runter fahren. Immer nach Süden bis das große Wasser kommt….

cheers,
-tmb

That was a cool place. White sand, great overview, blue water and fun to have a swimming in that kind on relaxing place. Where is that located??? Is that place near in the Philippines?? I love to go in that kind of place having a bonding my family and friends.

i tried a lot of times to include that script into my own sidebar.

but i get everytime the same message.

sorry – no search engine queries found. [wrong or empty table: wp_Counterize_Keywords » keyword ?]

iread all informations above this page, but it doesn’t work.

what can i do next?

thanks

i get everytime the sam emessage. sorry – no search engine queries found. [wrong or empty table: wp_Counterize_Referers » name ?].

i check the sql database and there are a lot keywords in the keyword table.

but how can i use this?

it seems that EXZO will not find the photo…

this is what I have put to the field with the example photo:

wp-content/uploads/2010/12/peggys-cove-ns-canada.jpg

and this what EXZO says…

Warning: imagecreatefromjpeg() [function.imagecreatefromjpeg]: gd-jpeg: JPEG library reports unrecoverable error: in /is/htdocs/…/www/joerg/wp-content/plugins/exzo/exzo.php on line 238

Warning: imagecreatefromjpeg() [function.imagecreatefromjpeg]: ‘/is/htdocs/…/www/joerg/wp-content/uploads/2010/12/’ is not a valid JPEG file in /is/htdocs/…/www/joerg/wp-content/plugins/exzo/exzo.php on line 238

Warning: imagesx(): supplied argument is not a valid Image resource in /is/htdocs/…/www/joerg/wp-content/plugins/exzo/exzo.php on line 629

Warning: imagesy(): supplied argument is not a valid Image resource in /is/htdocs/…/www/joerg/wp-content/plugins/exzo/exzo.php on line 630

I also have problems with the GPS data something is wrong, as google maps shows a position somewhere in Europe but it should be in Canada…

Any hints?

Thanks
Joerg

with ExZo plugin, altitude will display as : 7123 m.a.s.l.
I have no idea why….
another example gives 9723 m.a.s.l. instead of 97.23 m
sounds like a 10 factor..
but another will display 2919 m.a.s.l instead of 58.38 m
http://piksl.info/wordpress/wp-content/uploads/2010/10/20100924-017.jpg

I double checked my jpg data, with other stand-alone exif reader programmes
So in the end I disabled the display of altitude under the photo on my blog.
But if you know the source of this ‘problem’, I would be glad to fix it :-)

Best regards

Cedric

With the first one I get the aforementioned error.

With the last option I get this error:
No Image File Provided (filename=M92.jpg, name=M92)

My WordPress site is in a subdirectory wp, so I also tried this token:
But then I get this error:
Image file not found(ImagePath:/home/name/public_html/name/wp/wp/wp-content/main/2010_10/M92.jpg)
So that’s one “wp/” too many.

I don’t know what else I could try :(

you sure you are calling it correctly? Looks like you’re missing the image filename.

cheers,
-tmb

I’m getting these errors all the time, even on the plugin settings page before the preview part.
I don’t know why, but it seems to cut off the filename part.
I’d really like to use this plugin, can someone please help me solve this problem?

Warning: imagecreatefromjpeg() [function.imagecreatefromjpeg]: ‘/home/path/to/wp/wp-content/plugins/exzo/images/’ is not a valid JPEG file in /home/path/to/wp/wp-content/plugins/exzo/exzo.php on line 238

Warning: imagesx(): supplied argument is not a valid Image resource in /home/path/to/wp/wp-content/plugins/exzo/exzo.php on line 629

Warning: imagesy(): supplied argument is not a valid Image resource in /home/path/to/wp/wp-content/plugins/exzo/exzo.php on line 630

Das Essen war klasse… abgesehen von der “schärfe” – daran müssen wir noch arbeiten, damit wir Profis werden! Wann kochen wir wieder? Meine Küche steht auch gerne zur Verfügung! :-)

ich wollte auch dieses Plugin nutzen, bekomme jedoch folgenden Fehler:

Fatal error: Cannot redeclare intel2moto() (previously declared in /var/www/html/XXXXXX/html/wp-content/plugins/wp-gallery-exif-reader/exif.php:155) in /var/www/html/XXXXXX/html/wp-content/plugins/exzo/exifer/exif.php on line 162

PHP: 5.2.14
WP: 3.0.1

weiß da jemand Bescheid?
Danke
Henrich

Viele Grüße aus Berlin

D.M.

Das Essen war klasse… abgesehen von der “schärfe” – daran müssen wir noch arbeiten, damit wir Profis werden! Wann kochen wir wieder? Meine Küche steht auch gerne zur Verfügung! :-)

My plugin worked very well. Today a did an update to the newest version and i had the same problem with the zoom function.

So i openend the zoom.js with the editor. Then i searched the file for the word “wordpress” there are 2 links in this file. I did not install wordpress in /wordpress/wp-content. i changed the location and now it works fine again

coole tour!

auf der gleichen Seite unter:

gibt noch diesen Hinweis:

Tag ID Tag Name Writable Group Values / Notes
0xa430 OwnerName string ExifIFD (called CameraOwnerName by the EXIF spec.)

VG
Jörg

http://www.sno.phy.queensu.ca/~phil/exiftool/TagNames/EXIF.html

I know that it seems that the camera owner name is not part of the EXIF specification. But Apples Apperture is able to show it in the EXIF and as the 2.2 EXIF specs are outdated from 2002 would it be possible for you to add a tag for the missing EXIF field Canon provides?

I have found this:

TagID EXIF SubDir Name Size
0×0810 0×09 0×2807 OwnerName 32

in reagards to the camera owner EXIF field here (http://www.sno.phy.queensu.ca/~phil/exiftool/canon_raw.html).

Maybe this will help?

Many thanks again!
Joerg

sorry – I already found it in the last row…

.iemahge {
margin: 1px;
padding: 1px;
border:30px #444 solid;…[cut]

Thank You!
Cheers Yogie

do you know when you will add support for the Canon EXIF? I’m still looking forward to get the Camera Owner out of the EXIF to show up…?

Cheers

Yogie

is there a way to get a grey border (background) instead of the black one behind the photos?

I already tried several things within the exzo.css but it didn’t work :(

Please let me know!

Thank you so much!
Cheers
Yogie

As You see the thumb image is wrong, and the full version is not working.

Please write me back what should I do to make it work.

Cheers.

LG.
Francois

Sag mal was zur Innenbeleuchtung der Instrumente Nachts. Ich war seinerzeit sehr überrascht, dass mir der Wechsel von Seat-Rot auf Mercedes-Silber so gefallen hat (das ist ja eigentlich ein nebensächliches Kleinstdetail).

Wem das zu langsam ist, hier ist die schnellere Variante.
Was ich dabei gelernt habe:
1) Auto wirklich in die Mitte des Kreises stellen!
2) ein ebener Untergrund ist wichtig
3) mit EDV kann man viel ausgleichen, aber nicht alles

Den zweiten Versuch werde ich in ‘nem Parkhaus starten. Mal gucken welches sich da anbietet…

When I click on an image to zoom, the larger image appears in the footer of the page. Unlike Gareth, I actually want the zoom functionality which means commenting the lines he provides isn’t really a solution for me. Any ideas?

Die Anleitung für den Seilteppich finde ich erstklassig! Die graue Silikonspritzmaschine habe ich ja schon, jetzt fehlt mir nur noch das Keramik-Messer (@Anne: da lasse ich mir was von unserem Keramik-Fachmann Matthias empfehlen…) und das Seilkneul. Ach ne, das habe ich ja eigentlich schon: Ein Fadenvorhang ist vom Umzug noch übrig geblieben. Hoffnungslos verheddert. Damit starte ich , muss ja nicht gleich so massiv wie Euer Teppich werden.

Grüße,

Thomas

http://www.maps4fun.eu/de/klettern-kletterhalle-kletteranlage/ulm

Bietet eine Übersicht aller Kletterhallen in Ulm und Umgebung mit schöner Kartendarstellung. Auf Klick gibt’s zusätzliche Details! Ausserdem kann man sich auch noch viele andere Freizeitaktivitäten neben Kletterhallen anzeigen lassen…kannst ja mal vorbei schauen!

Gruss Martin

this is stuff i’ve done 2yrs ago, so i had to check. think all i’ve done is modify the tagcloud in cumulus:

$WpClooGooQ = new WpClooGooQ();
$tagcloud=$WpClooGooQ->Cumulus();
#print "DEBUG".urldecode($tagcloud)."END DEBUG";

this should go into the »wp_cumulus_createflashcode(...)« function

if you need more help, let me know.
cheers,
-tmb

Grüße
Arsenal

Great plugin!

But how do I get WP-Cumulus to work with CloOGooQ? (experimental example)

Would be great!
(I know some php, so if you give me some clues I think I’ll manage)

Lg David

Why is it fascinating? well it is very unusual to come across a topic that I have no frame of reference for, but the person writing has a huge passion for.

Amazing….

That would be awesome

Thanks

sure I’ll try to help mate. but your timing is just a little off. i’m currently on a business trip with very limited access to my stuff. So a detailed analysis my have to wait till the weekend. but one thing i noticed: i checked your blog and non of the pictures are showing. I’m always getting the 404 (f.e. http://www.aribrownest.com/wp-content/uploads/2009/10/ocean-beach-panorama.jpg ) Is that due to the moving or is there something else at work?

cheers,
-tmb

No Image File Provided (filename=ocean-beach-panorama.jpg, name=ocean-beach-panorama)

That’s just one example, but they all look like that. If I upload an image fresh, it works fine. I’ve looked in the wp_posts table and the “old” and “new” entries look identical to me. The image names are still right and the locations look good. Any idea what this could indicate? This is the only thing holding me up on the migration now. Any help would be *really* appreciated!

Aber: Früher oder später gibts ne zweite Auflage – wir werden dann an dich denken.

steht doch im zweiten Satz, wo ich es gekauft habe (ausserdem habe ich mich länglich darüber ausgelassen, dass ich mit denen nicht zufrieden war ;)

cheers,
-tmb

tolle Fotos, die ich bis jetzt gesehen habe. Hoffe, auch Teile meiner Serie nützen Dir bei der Zusammenstellung.

Ich habe übrigens 2 Eurofigther aus Originalfotos der Luftwaffe in den Himmel über der Burg montiert,falls Du Interesse hast, melde Dich bitte.

Liebe Grüsse aus Berlin

Yes, that was the problem. I downloaded the latest ver, and the sign problem on the coordinates Google link is working fine now – Thanks!

Could you double check that you have the latest version (v0.b7.8)? I think I’ve fixed that error in b7.8. If you are still running v0.b7.5 that would explain it all.

As far as external images are concerned, it’s been on the wish list ever since I started working on the script (see todo/wish list above). The reason it hasn’t been implemented yet has nothing to do with copyright (it’s not my responsibility how people use my code – I’m the more of a “guns don’t kill ppl, ppl kill ppl” type of person). It’s more of a technical thing. The plugin needs »physical access« to the image in order to read the exif. that means if you want to display the exif from an external source, the plugin would have to download the image (to some temp folder), read the exif and delete the image afterwards. now if you are running a busy site you wouldn’t want the extra traffic or the time delay so you’d probably argue, that’s there’s no need to deleted the image right away (and keep buffered for say a day). But then you’d have your images stored within wordpress again…
Alternatively I could read the image once and store it in an extra exzo-table within the wordpress sql-database. then you’d have to download the image only once and you’d get rid of the buffering/timedelay/storage issue. But that would add another complexity to the plugin that I probably won’t have the time to test or support.
Now it’s on the wish list, but it’ll not happen in the summer time. I wouldn’t hold my breath till the long winter nights, when there’s more time for coding.

cheers,
-tmb

This would be great if the Exif information was displayed as a pop-up when mouse-over the photo. Thus the user will only see this information when pointing on it, and the information will not permanently use up space nor clutter the visual feel of the gallery.

I’m definitly in if this is implemented.

Morten

I’m also using the GPS_COMBINED parm. You’re right, it’s showing West on the page…but when you click on the link, it’s translating that to + coordinate which must be East, thus google maps shows it in China. Is there asimple fix for this coordinate issue from the link?

Taken Date: 
%DATE_TIME_ORIGINAL%   
Location: 
%GPS_COMBINED%   

Also, regarding the upload….is there any way to use as full URL to pass to Exzo isntead of the default wp-content folder? This would make the plugin so much more friendly for me, to use my image library which is on a separate folder structure to wordpress…or for anyone to use external hosted images, of course. Is this a copyright issue, or something that could be changed in the future to allow external URL locted images?

first of you should be able to display exif regardless of how you uploaded the image. check my sandbox, I’ve used your image which I uploaded via ftp. The only restriction so far is, that the image needs to be within your wordpress/wp-content/ folder.

secondly you will notice in the sandbox, that the gps-coordinates display correctly. The only problem is the google maps link. I’ve used the %GPS_COMBINED% token. But I’ve probably overlooked one of those, so please let me know which one you are using.

cheers,
-tmb

Is there any way to display/use Exzo exif data from url supplied images WITHOUT uploading the images through wordpress?

Also, there still appears to be a problem with the negative latitude coordinates.

See the third image’s coordinates at this page http://www.motodyn.com/blogs/bikes/obs-home-page/arctic-circle-2008/the-riders/

The coordinates are N and W, yet exzo is presenting them as N and E – thus when clinking the cordinates, it displays the location as in Kazakhstan/China border, rather than in Michigan!!! (While I’d LOVE to have taken the picture in Asia, I can’t afford the trip. :) :) :)

Thx!

Is there a way to do so?

If so, could you show me an example of how to call exzo, for example with the picture located at
http://www.motodyn.com/media/pics/800/2008/Alaska%20317.jpg

….while my WordPress blog is located at
http://www.motodyn.com/blogs/bikes

Thanks!

I am having the same problem as Francesco, only I am not smart enough to figure out what I am doing wrong. Your help would be appreciated. I couldn’t figure out the // solution.

In the second warning, ” ‘/home/content/h/o/r/horsegogglepp/html/wordpress/wp-content/uploads/’ is not a valid JPEG file”, seeing /uploads as an invalid JPEG file is something I have tried to figure out. since its a directory.

Thanks, Don

Warning: imagecreatefromjpeg() [function.imagecreatefromjpeg]: gd-jpeg: JPEG library reports unrecoverable error: in /home/content/h/o/r/horsegogglepp/html/wordpress/wp-content/plugins/exzo/exzo.php on line 238

Warning: imagecreatefromjpeg() [function.imagecreatefromjpeg]: ‘/home/content/h/o/r/horsegogglepp/html/wordpress/wp-content/uploads/’ is not a valid JPEG file in /home/content/h/o/r/horsegogglepp/html/wordpress/wp-content/plugins/exzo/exzo.php on line 238

Warning: imagesx(): supplied argument is not a valid Image resource in /home/content/h/o/r/horsegogglepp/html/wordpress/wp-content/plugins/exzo/exzo.php on line 629

Warning: imagesy(): supplied argument is not a valid Image resource in /home/content/h/o/r/horsegogglepp/html/wordpress/wp-content/plugins/exzo/exzo.php on line 630

i simply add doublke slash “//” at the beginning of each line :D

Thanks for the useful plug in.

Could you think about something that add exif for multiple images in a post?

the error that i report is only:

Warning: imagecreatefromjpeg() [function.imagecreatefromjpeg]: gd-jpeg: JPEG library reports unrecoverable error: in /home/hosting/d/dagon84/www/wp-content/plugins/exzo/exzo.php on line 238

Warning: imagecreatefromjpeg() [function.imagecreatefromjpeg]: ‘/home/hosting/d/dagon84/www/wp-content/gallery/prrovareali/’ is not a valid JPEG file in /home/hosting/d/dagon84/www/wp-content/plugins/exzo/exzo.php on line 238

Warning: imagesx(): supplied argument is not a valid Image resource in /home/hosting/d/dagon84/www/wp-content/plugins/exzo/exzo.php on line 629

Warning: imagesy(): supplied argument is not a valid Image resource in /home/hosting/d/dagon84/www/wp-content/plugins/exzo/exzo.php on line 630

[...snip...]

Warning: imagecreatefromjpeg() [function.imagecreatefromjpeg]: gd-jpeg: JPEG library reports unrecoverable error: in /home/hosting/d/dagon84/www/wp-content/plugins/exzo/exzo.php on line 238

Warning: imagecreatefromjpeg() [function.imagecreatefromjpeg]: ‘/home/hosting/d/dagon84/www/wp-content/plugins/exzo/images/’ is not a valid JPEG file in /home/hosting/d/dagon84/www/wp-content/plugins/exzo/exzo.php on line 238

Warning: imagesx(): supplied argument is not a valid Image resource in /home/hosting/d/dagon84/www/wp-content/plugins/exzo/exzo.php on line 629

Warning: imagesy(): supplied argument is not a valid Image resource in /home/hosting/d/dagon84/www/wp-content/plugins/exzo/exzo.php on line 630

as you can see from here http://dagon84.ilbello.com/?p=137 .

Can you help me?

​/wordpress​/wp-content​/plugins​/exzo​/zoom​/ZoomProgress.png and
​/wordpress​/wp-content​/plugins​/exzo​/zoom​/zoom.css

When are these files called and what can I change to update the location where they are looked for?

Thanks in advance!

für diejenigen die die Exif-Daten an einer bestimmten Stelle im Layout angeben möchten habe ich folgenden Tipp:
bindet das Bild über ein Spezial-Feld (hier “image”) ein:
hier gebe ich den Pfad inkl Bildnamen in der Form “wp-content/pfad/bild.jpg” an

Für das Bild

<img src=”<?php echo get_settings(‘home’); ?>/<?php echo get_post_meta($post->ID, “image”, true); ?>” alt=”<?php the_title(); ?>” />

Für die Exif-Daten:
<?php
$exif = “[exif=\"".get_post_meta($post->ID, 'image', true)."\"]“;
$exif = apply_filters(‘the_content’, $exif );
echo $exif;
?>

so ich hoffe ich habe mich nicht vertippt :)

Abgesehen davon hat das Skript ja schon von allein eine WARNUNG ausgesprochen :)

Do you have any news about the images hosted on other servers than localhost/wp-content?

I receive this error message: No Image File Provided (filename=http://media.gura-humorului.eu/pictures/foto.lovingvama/2009/DSC_39771.jpg, name=http://media.gura-humorului.eu/pictures/foto.lovingvama/2009/DSC_39771)

Thanks! I’ll promise you eternal love if you manage this problem :D Your plugin seems great, but it’s too bad I can’t use it…

<p><!– BEGIN ExZo v0.b7.5 –>>><br />
[...meine Angabe in den Einstellungen...]
<!– END ExZo v0.b7.5 –</p>

Kannst Du die <p> weglassen?

[...meine Angabe in den Einstellungen...]

Kannst Du die weglassen?

Beispiel:
Wenn Kategorie == “Photo” oder != “News” (wie auch immer),
dann zeige zu jedem Bild die Exif-Daten an (falls verfügbar, sonst wie eingestellt)
sonst zeige nichts.

und das ohne dass ich [exif] im Post nutze, sprich das Script erkennt anhand des ein Bild.
Oder halt in Kombination mit Spezialfeldern.
Ich binde bei mir im Photoblog (den ich noch nicht veröffentlicht habe) 1 Bild pro Post über ein Spezialfeld “image” ein.
So dass ich es toll fände, wenn dass der sich den Pfad aus dem Feldwert zieht.

Dann noch eine Idee:
Wenn ich ein vollständeige URL angebe
http.[www.]meinedomain.de/pfad/wp-content/Restpfad/bild.jpg
Dann eine Überprüfung ob das wirklich meine Domain ist und ggf Pfad kürzen auf
wp-content/Restpfad/bild.jpg

freut mich wenns lohft. Zu Deiner Wunschliste: Was verstehst Du unter “Automatische Anzeige der Exif Daten für alle Bilder in einer Kategorie”. Sollen die Exif dann ohne die Tags angezeigt werden? Wie werden die Bilder eingebunden? Soll das Plugin dann auf das <img src... -Tag anspringen?

cheers,
-tmb

Aber ein bis zwei Ideen füg die Wunschliste hätte ich noch.

* Automatische Anzeige der Exif Daten für alle Bilder in einer Kategorie -> in Optionen wählbar
* Unterstützung von Spezialfeldern -> Name des Feldes über Optionen wählbar

Aber ein bis zwei Ideen füg die Wunschliste hätte ich noch.

* Automatische Anzeige der Exif Daten für alle Bilder in einer Kategorie -> in Optionen wählbar
* Unterstützung von Spezialfeldern -> Names des Feldes über Optionen angebbar

wie in der FAQ beschreiben, brauchst Du PHP5 oder höher.

cheers,
-tmb

Parse error: syntax error, unexpected ‘)’, expecting ‘(‘ in /www/htdocs/v108824/photoblog/wp-content/plugins/exzo/exzo.php on line 248

Habe Version (0.b7.3) über WordPress 2.7.1 installiert

don’t worry about it – i rather enjoy the feedback. I’ll fix the formating (going back to the correct E/W notation). Actually I think I fixed the link-issue in v0.7.6 (which also had the correct formating), but I guess that one never made it out there – my bad for holding it back. I’m off to bed now but will release a v0.7.8 tomorrow.

cheers,
-tmb

[Update] The fixed version is now online .

thanks for the feedback. Check the new version, I think I fixed the issue with negative long/lat values. At least it works for Matts bridge picture. Thanks for the patience :)

@Anton: drop me a blackberry picture and I’ll see what I can do. Wanted to fetch one of your site, but it seems to be down.

cheers,
-tmb

UPDATE on second thought, I think showing negatives isn’t correct at all, or is it? The long/lat for your bridge picture now says:

40° 42′ 16.6″ N, -73° 59′ 22.8″ W

but I think it should either be

40° 42′ 16.6″ N, 73° 59′ 22.8″ W (what it used to be)

or

40° 42′ 16.6″, -73° 59′ 22.8″,

My point being, that you either use negatives or the “E(ast)”, “W(est)” notation. I haven’t changed the code back yet, but let me know what you think.

irgendwie hast Du das Posting wohl in einen sehr persönlichen – aber dennoch falschen – Hals bekommen. Zumindest hat uns Deine Formulierung von “Hallen- und Heizungkletterer(n)” köstlichst amüsiert! Bitte mehr davon! Im übrigen gibt es noch viele andere Alternativen zum zu Hause bleiben: zum Beispiel draussen klettern (hast Du wahrscheinlich noch nichts von gehört, aber frag mal in dem Kletterladen Deiner Wahl danach) oder in andere Hallen gehen (aber auch dazu musst Du natürlich über den Tellerrand schauen). Ansonsten weiss ich ja nicht was Du als “Sturz” bezeichnest, aber was soll denn 1cm Schotter ab”federn”. LOL! Wer gescheit klettert, braucht sowas IMHO nicht!

gruss,
-tmb

I like the plugin allthough I have some problems to get it working:
1) The check if there’s EXIF data does not work for photo’s taken with a blackberry
2) As mentioned by the previous poster, the longitude isn’t correct (“-” should be “+”)
3) The plugin is hard to combine with postie (which many photobloggers use)

I think I can solve number 1 and 3, but I cannot get passed number 2.

Thanks,
Anton

Found another glitch. It looks like it is not fetching my GPS data correctly. Look here: http://mathewwithonet.com/2009/04/26/the-manhattan-bridge/ The longitude should be negative. If you just manually add in the negative in the Google Maps link, it is exactly where I was… Hope it’s an easy fix. Thanks again for the awesome plugin.

Matt

I am a newer of wordpress so I can’t see the pricture after applying it lik this ::: ::: to the edit post .

And I am newer of wordpress, so if you can could you let me know how to use tokens.

Thanks in advance.

Kim

PHP Version : 5.2.0-8+etch10 – Upgraded to this at the time to use this plugin.
PHP Exif support : Yes ( V1.4 )

I am using a email->wordpress post tool, which uploads and processes my images, but only allows me to refer to the image by the full “http://www…” path. As such I cant get this plugin to automatically detect the image and display the exif info.

Thanks!

function _DashedCrossHair($im,$lon,$lat) {
$local = $this->_ImageColorAllocateFromHex($im, $this->user_Color_Crosshair);
#imagedashedline($im,$this->_Lon2X($lon),0,$this->_Lon2X($lon),1000,$local);
#imagedashedline($im,$this->_Lon2X($lon)+1,0,$this->_Lon2X($lon)+1,1000,$local);

$fg = $this->_ImageColorAllocateFromHex($im, $this->user_Color_Crosshair);

$st = array($fg, $fg, $fg, $fg, IMG_COLOR_TRANSPARENT, IMG_COLOR_TRANSPARENT, IMG_COLOR_TRANSPARENT, IMG_COLOR_TRANSPARENT);
ImageSetStyle($im, $st);

imageline($im,$this->_Lon2X($lon),0,$this->_Lon2X($lon),1000,IMG_COLOR_STYLED);
imageline($im,$this->_Lon2X($lon)+1,0,$this->_Lon2X($lon)+1,1000,IMG_COLOR_STYLED);

$local = $this->_ImageColorAllocateFromHex($im, $this->user_Color_Crosshair);
#imagedashedline($im,0,$this->_Lat2Y($lat),2000,$this->_Lat2Y($lat),$local);
#imagedashedline($im,0,$this->_Lat2Y($lat)+1,2000,$this->_Lat2Y($lat)+1,$local);

imageline($im,0,$this->_Lat2Y($lat),2000,$this->_Lat2Y($lat),IMG_COLOR_STYLED);
imageline($im,0,$this->_Lat2Y($lat)+1,2000,$this->_Lat2Y($lat)+1,IMG_COLOR_STYLED);
}

I’ve read through the comments regarding using IPCCP and StatPress. So far, I am unable to get it working correctly.

I’ve changed the default setting of “Counter table name” to “wp_statpress” as well as changing the default setting of “remote IP field name” to from “IP to “ip”.

I have not made any additional changes to the default settings, when I click “Update Settings & Redraw”, I am presented with:

Cluster Map Generation Started
0s >> Loading GeoIP into memory

As well as the message “Generating the cluster map might take a while – please be patient!”

I let it sit there for a long period of time and nothing changes. When I eventually decided to revisit the settings page, I am giving a preview map.

My method in trying to add the map to the front page of my blog in the sidebar, was to edit the widgets, add a “text” widget, including the “Output template” on the IPCCP settings page. All that I see on my sidebar is: “%BLOGNAME% Cluster Map”. This indicates to me that the image is not being displayed, as that is the alt tag defined in the HTML.

Assistance would be greatly appreciated.

check comment #74 (and below) for some discussion on fetching data from statpress. does that help you any?

cheers,
-tmb

Cluster Map Generation Started
0s >> Loading GeoIP into memory DONE
2s >> Fetching database entries (SELECT ip FROM wp_statpress) DONE (1418 entries)
2s >> finished fetching 0 entries
2s >> Finished with additional drawings
Done generating a new cluster map

1418 entries returned from the query then suddenly 0 entries? Doesn’t make sense. Obviously IPCCP is querying the db correctly (there are in fact 1418 entries in this table) but isn’t processing them correctly. HELP!

But… It doesn’t work in my WordPress…
WP 2.7 with Atahualpa Theme (personalized a little, only in CSS style sheet).

When I use the plugin, I’ve the imagine covered by two rectangular gray things, that include the link to a photo in lightbox…

Can I resolve?
Thanks!
a_

do you know when you will add support for the Canon EXIF? I’m still looking forward to get the Camera Owner out of the EXIF to show up…?

Cheers

Yogie

I thought I might add some of my Nikon D70s specific exif data but when looking at the file…. well… I’m a bit lost.
I would like to add the lens and ISO info which are apparently not extracted by default (though I can see them in exiftool).
How can I add those to the data set?
thanks,
Gabi

Removing:
Line 218 and 219:
echo ‘pluginURL.’/zoom/zoom.css”>’;
echo ‘pluginURL.’/zoom/zoom.js”>’;

I have no need for the Zoom at all so this should work for me, so far testing proves successful.
Will try in live site and if any issues, will advise accordingly.

http://img204.imageshack.us/img204/9605/exzogf0.png

Currently disabled Plugin and removed EXIF reference on posts till resolution can be advised on.

All I need is to use the Exif only call and not the whole plugin for imagery, if there is an alternative for Exif only, Please advise.

will do – thanks for the idea.

cheers,
-tmb

function _wpHead() {
echo “\n”;
echo ‘‘;
echo ‘pluginURL.’/exzo.css” />’;
echo ‘pluginURL.’/zoom/zoom.css” />’;
echo ‘pluginURL.’/zoom/zoom.js”>’;
echo ‘‘;
echo “\n”;
}

Orion sieht man vor lauter Rest kaum noch! Schön!!!

GALAKTISCH!! Die sind … SUPER!! Musst beim Segeln dann auch welche machen – dort kann man die Milchstrasse herrlich sehen… dafür ist es hier leider zu hell – zu viel Lichtsmog… Tolle Bilder. Mein Favorit bis jetzt, das letzte ;-) oder doch das erste…oder… hmmm…

I checked you site and notice quite a few errors. as far as ExZo ist concerned, most of them are due to you not using the standard »/wordpress/« structure:

but don’t worry. there an explanation on how to fix things on comments #120 and #63.
hope this helps,
-tmb

also, the zoom still doesn’t work even though i have the js script in the header.

any ideas?

URL: http://www.shugraphics.com/?page_id=10

Chris

thanks for the comment. Could you tell which line are the one you commented out?
- imagecreatefromjpeg
- imagesx / imagesy

anything else? I’ll look into whether I’ll really need them. Most likely there’s a way around.
thanks in advance,
-tmb

I would like to see further support for keywords, title and description from IPTC info in a future release. Also, if we can skip the image creation process for EXIF only that would probably fix this errors I have received.

Thanks for a great plugin!

it is work ;)

no need to read the comments if you read the FAQ ;-) Most likely your problem is due to a PHP4 / PHP5 conflict. Your webserver needs to be running the latter for ExZo to work.

cheers,
-tmb

ps: I’m running WP 2.7 as well.

Parse error: syntax error, unexpected ‘)’, expecting ‘(‘ in /…/wp-content/plugins/exzo/exzo.php on line 248

Neben dem Sierra kann ich euch noch weitere Tequilas empfehlen…
Ich selbst bin ein total Fan von Tequila, vor allem der Corralejo anejo 0,7 Liter.

Schaut einfach mal, den gibt es unter anderem hier:
http://www.champagner-express.de/Tequila-c-77.html

Grüße Sandra

Thanks for reply, and status. I look forward to the functionality when I can link remote folder/directory image locations to display their EXIF data, than those within the wp-content folder.

Baldy

this is my setup:

hth,
-tmb

What i can do? the tables are working fine.

What a put in Unique ID name? just ID?

Great plugin

Cheers

Just got back home – was climbing the whole day. I’ll fix that asap. Thanks to your detailed error reporting it should be easy to fix.

thanks,
-tmb

However, when I click on the EXZO location data on the website, Google Maps goes to the opposite longitude. For example, EXZO displays 52 degrees North, 1 degree West but Google Maps goes to 52 degrees North, 1 degree East. I think the longitude bit of the url being sent to Google Maps needs the plus and minus signs reversed.

Regards,
Chris

See this:

http://help.godaddy.com/article/3937?isc=isc_code

(NB: I am assuming this will get Exzo to work, the 24 hours have not elapsed for me yet but I am fairly sure this is the issue which is generating the error code)

Also, despite what some of their online documentation says, GoDaddy does not allow you to download nor view the .htaccess file, which would be the most straightforward way of handling this issue.

just noticed this warning (see here) concerning the file_exists function (which I am using to verify that a thumbnail image is available):
This function returns FALSE for files inaccessible due to safe mode restrictions. However these files still can be included if they are located in safe_mode_include_dir.

Your server might be running with some of those safe mode restrictions… I switched to the is_readable function which hopefully behaves correctly even when the safe mode is on. Try it and let me know.
cheers,
-tmb

Hope this helps,
Chris

Tried your template and tried completing the overlay fields but no joy. I’m not getting a link when I hover over the image either. Your link (sandbox) is: http://blog.vimagic.de/wordpress/go.php?http://blog.vimagic.de/wordpress/wp-content/uploads/2008/11/2008_11_28.jpg.

My template looks like:

Camera: %CAM% (%MAKE%)   Focal Length: %FOCAL%Create Date: %DATE_TIME%   
Shutter: %SHUTTER%Location:
 %GPS_COMBINED%   Aperture:
 %APERTURE%
Exposure Program: %EXPOSURE_PROGRAM%   ISO:
 %ISO%
Flash: %FLASH%   Exposure Bias: %EXPOSURE_BIAS_VALUE%

Hope this helps,
Chris

Camera: %CAM% (%MAKE%)   Focal Length: %FOCAL%Create Date: %DATE_TIME%   
Shutter: %SHUTTER%Location:
 %GPS_COMBINED%   Aperture:
 %APERTURE%
Exposure Program: %EXPOSURE_PROGRAM%   ISO:
 %ISO%
Flash: %FLASH%   Exposure Bias: %EXPOSURE_BIAS_VALUE%

> Could you check whether it works if you re-enable the overlay text/email.
All three enabled – no joy,

Incidentally, when I hover over your sandbox page the link looks like:
http://blog.vimagic.de/wordpress/go.php?http://blog.vimagic.de/wordpress/wp-content/uploads/2008/11/2008_11_28.jpg

I get no link at all.

I’m sure I’ve mad a silly error somewhere. I’ve got the day off tomorrow so I’ll look at it all again.

Thanks again.

hope this helps,
-tmb

ps: My bad: it might be something else. Could you check whether it works if you re-enable the overlay text/email. This might actually a bug, but I’m too tired to check it myself now. more tomorrow.

Here’s my new syntax (just for the entry for 28 November):
[exzo url="" title=""]/wp-content/uploads/images/2008_11_28.jpg[/exzo]

The image displays as cropped version of the full-size image with no magnifier.

As a side issue, no thumbnail is now displayed in the Archives…

You’re not bothering at all! A couple things here. Anything you put in the url="" is used for an external link. Not what you want, so leave it be for a second. Within the [exzo]-tags you should put the larger version of the image. exzo will find the correct thumbnail if it’s configured correctly. So I suggest having two images: image.jpg and image.thumbnail.jpg and then using
[exzo url="" title=""]/wp-content/uploads/images/image.jpg[/exzo]
Does that make sense?
cheers,
-tmb

ps: if you are happy with WordPress’ thumbnails, your of course don’t need the additional .thumbnail.jpg-image.

Thanks for that – it’s sorted the CLOSE issue!

What’s wrong with my syntax here?:
[exzo url="http://www.hang-out.co.uk/potd/wp-content/uploads/images/2008_11_28_large.jpg" title=""]/wp-content/uploads/images/2008_11_28.thumbnail.jpg[/exzo]

No magnifier and the image zooms in a new window.

I promise I’ll stop bothering you soon!

Chris

I’ve got an idea about what’s happening. Looked at your site again and noticed a problem with some of those CSS files:

Have a look at comment #63. Think you may have to substitute “wordpress” by “potd” in lines 196 and 244 (in this file). Hopefully it may solve some of your issues (maybe even all of them).
cheers,
-tmb

Thanks for your help so far – I’m enjoying the plug-in – but I do need some more of your good advice!

1. With your plug-in enabled (and any wordpress theme) my pages load with a CLOSE link at the very bottom of the page. I’ve tried reinstalling your EXIF template settings in case I messed them up but that didn’t get rid of it. Any ideas on what could be causing this CLOSE link to appear?

2. I’ve also tried using the zoom function instead of just displaying the EXIF data, but I can’t get it working. I set the thumbnails to 720 px across but the magnifier doesn’t appear on the image and the larger image opens in a new page. Again, any help would be great, but I’m very happy with my site as it is!

Best Regards,
Chris

One point: The FLASH data sometimes reports ’8′ and sometimes ’24′ when the flash doesn’t fire. The plugin only displays “Flash did not fire” for metadata 24, although I have no idea why there’s a difference in the metadata.

One request – I use Olympus gear and there isn’t an Eixf Token for the lens type. For example, for my picture 2008_11_26 (Portchester Castle), Apple’s Aperture shows under MetaData: Lens Model: 70.0-300.0 mm f/4.0-5.6, but Photoshop CS4 shows nothing in this field. Is it possible to extract or transfer this data from Aperture to Photoshop so your plugin can read it?

Keep up the good work!

Chris

thanks for the instantaneous feedback but seriously: no rush mate! No error message sounds great to me. The problem with no EXIF showing in this particular case is easily solved. Your image simply doesn’t contain any – at least non that ExZo or Photoshop can find ;)

They most likely get stripped in your postprocessing workflow.

cheers,
-tmb

Probably me – it’s late and I’ve been up all day…

fand auch das das eine tolle Erfindung ist. Vor allem brauch im mir jetzt nicht mehr so genau merken, wo ich die Bilder in den Bergen / im Urlaub mache. Der Exhibitionismus wurde auf eine neue Ebene gehoben :)
Das mit den unterschiedlichen Zoom Werten lag eigentlich mehr daran, dass das erste Bild ein “Panorama-Bild” (bestehend aus 4 Bildern) ist. Beide sind vom Parkhaus aus gemacht (also beide im stehen). Aber nette Idee ;)

cheers,
-tmb

ps: kommst Du zur Weihnachtsfeier am Wochenende vom 6. ?

@Chris: Thanks mate for reporting that! Using non-wp-uploaded images was supposed to work! It obviously broke with one of the later releases (probably with the implementation of the v0.b7 – option to use the wp-generated thumbs). I hope I fixed it with todays release of v0.b7.5. try it and let me know if it works.

@Baldy: not using WordPress to upload the image isn’t the problem (at least after I fixed the bug Chris just reported). Currently ExZo does need physical access to the images though – that is they must be placed somewhere below /wp-content/ and cannot be on another domain/server or even a directory parallel to /wp-content/. I’m currently working on a version that will let you access any image anywhere on the net. But that’s still far off in the future. Sorry about that. BTW: impressive trip you made there.

cheers,
-tmb

I’m uploading photos manually and although the dummy image shows properly in Settings, I get the “file not found” error whenever I call:
[exif="/wp-content/uploads/images/2008_11_26.jpg"]

e.g.

No Image File Provided (filename=/wp-content/uploads/images/2008_11_26.jpg, name=/wp-content/ uploads/ images/ 2008_11_26)

Is this because I’m not using the WordPress Uploader?

Thanks in advance,
Chris

I think so. It’s from Anders Holte Nielsen, version 0.53 and appears to be collecting data fine.

Cheers!!

Ich helfe dir noch ein bisschen: Slackline ZURRfix (etwa 50€) oder?

Ausserdem rechnet er automatisch mit dem Zoom das du nuzt :D zwichen die 2 Bilder Bilder gibt es 2 unterschiedlichen Werte, und nur das zoom (ausser die Uhr) hat sich geandert ;)
Und mit 1 Meter mehr am Abend verdachte ich dich dass du am Vormittag Faul bist und einfach sitzt um Bilder zu machen. Im gegensatz stehst du am Abend um schneller nach Hause zu gehen oder?

LG.

PS: Jetzt kannst du mir wiederfinden: (GPS: N 47°57’62,5″ E 7°57’05,0″)

still struggeling with the same issue as in comment #86? I really have no clue whats happening. You are using Counterize (and not Counterize II), right?

cheers,
-tmb

any chance of getting any help with this?

Cheers!!

I am referencing all my pictures on my blog from a different hosted directory and did not use wordpress to upload the pics, but would like to use your nice plugin to show the Exif data if possible.

I dowloaded and activated the plug-in, and tried to change the blog code to call Exzo using the syntax example, but have not had luck.

If the function is possible now, can you show me how to use the command from the current code snippet in my blog (see below)

Thanks!
Baldy.

vielen Dank für’s erneute Testen. Die neue Version v0.b7.4 (bisher nur hier zum download) hat den Titel auch wieder im gezoomten Bild. Das ist in einer schlaflosen Nach wegen XHTML-Kompatibilität fälschlicherweise rausgeflogen. Jetzt sollte es funktionieren!

Zum Thema Uhrzeit & Datum: der String wie Du ihn auf Deiner Webseite hast, ist so formatiert wie es aus der Camera kommt. Versuche mal statt %DATE_TIME% den Token %DATETIME_DE% zu benutzen. Den habe ich gerade extra für Dich eingeführt :) Wenn Du die Uhrzeit lieber vor dem Datum haben möchtest, musst nur Bescheid sagen.

Ähnliches gilt für den “Fehler” mit Komma bzw. Punkt bei der Focal-length. Der Wert %FOCAL_LENGTH% ist der aus den EXIF ausgelesene. Und da die Kamera-Hersteller sich an die anglosächsiche Interpunktiation halten und dort in der Tat ein Punkt als Komme eingesetzt wird, ist das kein Fehler sondern für Deutsche nur ungewohnt. Da ich aber noch keine Cam gesehen habe, wo nicht .0 steht, habe ich den Token %FOCAL% eingeführt, der die unnütze Genauigkeit abschneidet.

gruss aus Ulm,
-tmb

ps: habe gerade den neuen Token noch einmal umbenannt. sry falls das zu Verwirrung geführt haben sollte.

Ich hab jetzt deine aktuelle Version installiert. Bei mir ist nun nicht mehr der Titel unter dem Bild wenn man es anklickt. War früher in einer schwarzen Ellipse mit weißem Rahmen. Ist dies nun weg? Dann würde ich gerne wissen, wie man die Anzeige des Datums auf TT.MM.JJ Uhrzeit umstellen kann. Bei der Funktion FOCAL denk ich ist ein Fehler. Da gehört statt .0 mm ,0 mm. Bei mir funkioniert es nun.

Danke schon mal im Voraus für deine Bemühungen und Infos.

I’m not quite sure this makes sense. Do you want the same Picture/ExIf to be shown in your template? maybe you could elaborate a bit and we’ll figure out a way.

cheers,
-tmb

@Kim: I checked your RSS at feed://photoblog.kimguanzon.com/feed/ and it seems fine to me. Did you fix the problem already?

@Nix: I’m not quite sure what the problem could be. Might be something trivial like the text encoding of the files (where did you download ExZo from?) or some conflict with another plugin. Try downloading an older version to see whether that one works.

cheers,
-tmb

Warning: Cannot modify header information – headers already sent by (output started at /home/phplabbi/public_html/photo/wp-content/plugins/exzo/exzo.php:1261) in /home/phplabbi/public_html/photo/wp-includes/pluggable.php on line 770

What should I do?

King regards!
Nix

http://photoblog.kimguanzon.com

Warning: imagecreatefromjpeg() [function.imagecreatefromjpeg]: gd-jpeg: JPEG library reports unrecoverable error: in /nfs/c01/h08/mnt/44385/domains/photoblog.kimguanzon.com/html/wp-content/plugins/exzo/exzo.php on line 242

Warning: imagecreatefromjpeg() [function.imagecreatefromjpeg]: ‘/nfs/c01/h08/mnt/44385/domains/photoblog.kimguanzon.com/html//wp-content/uploads/posts/year1/’ is not a valid JPEG file in /nfs/c01/h08/mnt/44385/domains/photoblog.kimguanzon.com/html/wp-content/plugins/exzo/exzo.php on line 242

Warning: imagesx(): supplied argument is not a valid Image resource in /nfs/c01/h08/mnt/44385/domains/photoblog.kimguanzon.com/html/wp-content/plugins/exzo/exzo.php on line 614

Warning: imagesy(): supplied argument is not a valid Image resource in /nfs/c01/h08/mnt/44385/domains/photoblog.kimguanzon.com/html/wp-content/plugins/exzo/exzo.php on line 615

-1- When I disable SuperCache plugin alone the theme rendering comes back.

-2- When I disable the ip city cluster plugin alone the rendering comes back.

Cluster Map Generation Started
0s >> Loading GeoIP into memory DONE
0s >> Fetching database entries (SELECT ip FROM wp_statpress) DONE (4206 entries)
0s >> finished fetching 0 entries
0s >> Finished with additional drawings
Done generating a new cluster map

to answer your question, I’ve used the binaries. Just download the complete package and you’ll notice the files in ipccp/GeoIP/ (the ».dat« files). BTW you shouldn’t need to download anything unless you want the latest GeoIP distribution.

cheers,
-tmb

ps: the download section above has working links to the database-files.

not a lot of info there… any error messages in your servers log files?

cheers,
-tmb

Cluster Map Generation Started
0s >> Loading GeoIP into memory

even after 15 min, there is no change
what could be the problem?
Thanks

Ich kanns nur empfehlen, gerade für solche Abende ;)

probably my fault. been having some issues with SVN. anyway, just to make sure: you did deactivate the old version before trying the new one, right? Otherwise WordPress gets confused by two plugins trying to declare the same functions…

cheers,
-tmb

ps: currently it’s better to grab the pluin off my site instead of wordpress.com until I get my SVN stuff sorted.

just upgraded, got this error:

Fatal error: Cannot redeclare exzo_options_form() (previously declared in /****/wp-content/plugins/exzo/trunk/exzo.php:1207) in /****/wp-content/plugins/exzo/exzo.php on line 1209

is that your error or my error??? lol

Currently ExZo needs “phyiscal” access to the pictures, thus access via web is not yet implemented. I’m looking into this in a (very) future version.

cheers,
-tmb

Contragulations for the plugin and thank you. I try to extract exif from pictures hosted on flickr and when I put the url of the picture in the tag [exif="http://farm4.static.flickr.com/3088/2896208554_8185830041_o.jpg"], I get this error message : No Image File Provided (filename=http://farm4.static.flickr.com/3088/2896208554_8185830041_o.jpg, name=http://farm4.static.flickr.com/3088/2896208554_8185830041_o). Is it possible to get exifs from an flickr hosted picture ?

Thomas

for future versions, it would be nice if we could change the stylesheet via the plugin page, rather than doing it manually. i’m keen to tinker with the plugin design, making it smaller and more ‘minimal’. i guess i can do that via the exif template, but a basic CSS editor would be cool for those who don’t know how to change style sheets.

but, this is just my opinion. your plugin is awesome and users appreciate your hard work.

cheers

david
http://www.davidsmeaton.com

Ich könnte leider nicht mitmachen. Allerdings wenn es klappt bin ich gerne dabei nächstes Jahr.

L.G.

I’m trying to answer each comment in order of appearance.

@Jürgen: Die Thumbnails werden nur dann richtig angezeigt, wenn sie auch gefunden werden. Wahrscheinlich liegt das Problem daran, dass Du die falsche thumbnail-extension eingestellt hast.

@Laurent Laval: well it seems you got it working. there seems to be an CSS conflict though…

@Jocuri: what’s the error message?

@DanB: I guess that’s an issue for the next release. I’ll look into it. To be honest I’m not using the WordPress thumbnails, because I think the quality isn’t up to par with Photoshop. I’ve got my own Photoshop macro that save my image and a thumbnail. Those Photoshop thumbs all get the same extension (*.thumbnail.jpg) But I see the possible demand to get it running with WordPress’ home grown thumbs. Though I couldn’t think of any photographer who would want to use those ;) I’ll look into it anyway, promise.

@david: this error usually happens when ppl use PHP4 instead of PHP5. double check to make sure you’ve got the right version.

Did I miss anybody.
cheers,
-tmb

is “ikru_” the prefix for all your databases? you probably don’t need it then. try without it.

cheers,
-tmb

this plugin idea is great. however, i’m also getting a fatal error during install. i’m running wordpress 2.6.2.

fatal error was this:

Parse error: syntax error, unexpected ‘)’, expecting ‘(‘ in D:\******\wp-content\plugins\exzo\exzo.php on line 248

not sure what that means … LOL … i’m a photo blogger, so i would love to get this plugin working.

cheers

david

http://www.davidsmeaton.com

im using the Cloogooq plugin with Counterize II.. and its saying sorry – no search engine queries found. [wrong or empty table: ikru_Counterize_Referers » name ?]..

i put ‘ikru_Counterize_Referers’ on Counter table name AND ‘name’ on the Referer field name, then ‘ikru_Counterize_Pages’ and ‘url’ for the Local Counter table name and Url field name..

there is an entry in the DB.. any clues why?

My thumbnails are proportionate. Also I don’t see anywhere in WP where I can set a fixed thumbnail ext.

Ich habe übrigens vergessen meinen Chip zurückzugeben, da müssen wir nächstes Jahr wohl wieder mitlaufen :)
Irgendwie irritiert mich das Bild, hat tmb eingepullert?

gruß

don

I am using WP 2.2.1, and new to WP hence I do not know how to investigate this error.

Cheers!!

And that is what I see : http://www.photo-net.fr/?p=17

Escuse my ignorance, but I don’t know what to do ??
Can you help me ?
Regards
Laurent

Ich hab deinen Exzo Plugin laufen. Ich hab Probleme mit den Einstellungen. Ich kann das die Bildgröße nicht richtig einstellen und das thumbnail in der Vorschau ist nur ein Crop aber nicht das ganz Bild. Was muss ich wie einstellen um die Optik wie bei dir zu erreichen? Muss ich da eventuell auch etwas in WP ändern. Bedanke mich im Voraus für Infos.

@Max Belloni: thanks for the info! I’ve included the new version of exifer (1.6) in the package. thanks again.

@godlie: for starters try the new version. as Max pointed out there seemed to be some issue with the old Exifer. Your error messages look somewhat alike.

cheers,
-tmb

any ideas what that can be?

Can you have a look at it?

thx

Now it works.

Ciao!

Parse error: syntax error, unexpected ‘)’, expecting ‘(‘ in /web/htdocs/www.velumvolitans.org/home/wp-content/plugins/exzo/exzo.php on line 248

On a test site, instead (using WAMP), the Ezxo management page, after the Exif template part, starts showing the pho code, and finsh with the error

Fatal error: Call to undefined function read_exif_data_raw() in D:\Program Files\wamp\www\wp_photo\wp-content\plugins\exzo\exzo.php on line 583 (see also my email)

Both them uses WP V2.6.1

Any ideas? Exzo would be a VERY interesting plugin for me!

Many thanks in advance for any help

Klar, kann ich mal probieren.
was ich halt nicht verstehe: wieso die anderen Tags, welche auf die selbe Art eingebunden werden, diesen Fehler nicht produzieren.

Ich nehme an, Du lädst die Bilder auch mit WP hoch. Dann versuch mal die Bilder so einzubinden, wie oben angegeben (also insbesondere ohne komplette Pfad-Angabe):
[exzo url="" title="Morgenstund"]gimpelvorbau0708__001.jpg[/exzo]

Die URL brauchst Du übrigens nur, wenn Du auf was anderes Verlinken möchtest. Wenn es nur ums Zoomen geht, lass den Eintrag frei. (Wenn Du aber z.B. von der Startseite aus, per klick auf das Bild zum Eintrag kommen magst, dann kannst Du in URL den Artikel eingeben – oder url=”TMB_PERM”)

probiers mal aus,
-tmb

Habe gerade in einem weiteren Artikel die genannte Fehlermeldung gehabt… nach ein bisschen herumprobieren habe ich festgestellt, dass es in beiden Fällen immer nur eine Bilder-einbindung ist, welche diesen Fehler verursacht.

In den Betreffenden Beiträgen habe ich diese Bilder jetzt erstmal weggelassen, allerdings scheine ich etwas blind zu sein, da ich den Fehler nicht erkenne.

Das sind die beiden EXZO-Tags, welche den Fehler verursachen:

[exzo url="/wp-content/plugins/exzo/images/spinne2fressen.jpg" title=""]/wp-content/plugins/exzo/images/spinne2fressen.jpg[/exzo]

[exzo url="/wp-content/plugins/exzo/images/schmetterlingspaarung_06.jpg" title="Schmetterlingspaarung"]/wp-content/plugins/exzo/images/schmetterlingspaarung_06.jpg[/exzo]

Habe dein Plugin inzwischen soweit am laufen und auch die ersten Einträge geschrieben… naja, zumindest den ersten…. beim zweiten kommt nur folgender Text:

Fatal error: Call to a member function getEntry() on a non-object in /var/www/vhosts/caina.de/subdomains/photography/httpdocs/wp-content/plugins/exzo/exzo.php on line 436

Keine Ahnung, warum das einbinden der Bilder beim ersten Beitrag funktioniert hat und beim 2. nicht mehr.. :-/

Gruß,
Chris

Sorry but I’m still using the same version (0.b5.8) but have never been able to get it to work yet. Counterize appears to be providing data, however, it seems like IPCCP isn’t connecting to it. Could that be possible?

Cheers!!

this is really weird and currently I’ve really got no clue. I checked your site and the /cool – test you mentioned earlier. Just wondering: which version of IPCCP are you using now (the one that doesn’t work)? And which version was working for you in Feb?

cheers,
-tmb

I’m still having troubles getting this to work. Counterize is presenting data, however, nothing appears to happen with IPCCP after hitting update settings and redraw except I now have a new error now but cannot be sure what caused this change:

Parse error: syntax error, unexpected $end in /my_install/location/public_html/wordpress/wp-content/plugins/ipccp/GeoIP/GeoIP.php on line 1

Still no entries in the bluetrait event viewer nor in the server error log. I really dig your plugin and want to get it to work on my site, so I look forward to your help. Please let me know what info you need or you need me to do for this to work. Thanks!

Cheers!!

you are quite right. IPCCP has no table of it’s own. It’s using the table Counterize is filling. Thus IPCCP will work with any statistics plugin that keeps track of the necessary infos.

why are you wondering?
-tmb

Thanks again for your help with the bothersome questions.

Cheers!!

wollte mal gucken, aber auf Deiner Seite kam nur die Aufschrift Tja, du suchst da nach etwas, das nicht da ist…. Aber wie es aussieht, hast Du das Problem schon gut analysiert. Das Aussehen der Ausgabe kannst Du übrigens in den ExZo-Einstellungen ändern. Ich benutzte bei mir (und damit in der Standard-Einstellung) eine Layerstruktur die mit Sicherheit bei einigen Templates zu Problemen führt. In den Fällen einfach die Ausgabe in den Einstellungen anpassen.

viel Spass beim Experimentieren,
-tmb

thanks for the feedback. I think FF has always been displaying the Cities without linebreaks. For me that makes it useless as most spots of interest usually contain too many Names for my display. Ah well, you just can’t have it all.

cheers,
-tmb

das problem mit dem exzo scheint Theme abhängig zu sein.
Mit dem Original WP-Theme funktioniert es 1a, mit manchen anderen bekomme ich einen komischen Overlay-Effekt für die Bildverlinkung, aber das Bild ist im ganzen zu sehen (es zeigt sich nur ein Rahmen) und mit anderen Themes wird mir das Bild durch den Overlay-Effekt komplett verdeckt.

i tried to use exzo with WP 2.6.1 but it would not work very well…
on my page you can find a small preview:

http://photography.caina.de

can somebody tell me, what i have done wrong ?

Thanks, Great Tool!

Vielen Dank, nun funktioniert alles, habe wordpres angepasst das es die thumbnails richtig benennt und nun geht alles.

okay i have changed the path, but no change.
Have you an idea?

Greetings Philipp

first of all I noticed you are not using the wordpress default installation by running it outside of the a wordpress folder. that’s no big issue but you should check the “zoom.js” file within the “exzo/zoom/” directory. You should change these two lines:
line 196:
zoomStyleSheet.setAttribute(‘href’,'/wordpress/wp-content/plugins/exzo/zoom/zoom.css’);
to
zoomStyleSheet.setAttribute(‘href’,'/wp-content/plugins/exzo/zoom/zoom.css’);

and line 244:
loadPreloader.src = ‘/wordpress/wp-content/plugins/exzo/zoom/ZoomProgress.png’;
to
loadPreloader.src = ‘/wp-content/plugins/exzo/zoom/ZoomProgress.png’;

let’s see how that works for you.
cheers,
-tmb

thanks for the fast answer.

You can see it here:
http://blog.duud.org/

I am only using the default wordpress upload, do I have to use a further plugin to create the thumbnail?

Greetings Philipp

hard to tell without additional informations. what’s the thumbnail extension you are using? do you have an example page, so we can see what’s happening?

cheers,
-tmb

I can use the exif function, but the zoom functionality don’t works and the images in the preview are to big, they are not correct resized.

Have I to setup there every thing?

Greetings Philipp

p.S.: i c all

if you’re interested, please let me know, I’ll send you the code.

Nope, nothing in the error logs for IPCCP. And I don’t get even the cluster map generation message, only the patience message. Question: IPCCP is making it’s own queries of the countrize table, right? I was curious about the relationship between counterize and IPCCP.

Thanks again for your help with the bothersome questions.

Cheers!!

@Nelson: you long/lat works for me (have a look at http://blog.vimagic.de/statistics/ ) … Sure you’ve entered the values correctly (comma vs. periode issue maybe?)

Yeah, I’m Albert – using my old Uni as a ssh proxy. And as Albert Einstein was born here, their node carries his name.

I’ve uploaded a snap at www.{mywebsitehere}.com/IPCCP_status.jpg showing exactly what the bottom of the config page looks like after selecting “Update Settings & Redraw”. Counterize is installed and functioning. I confirmed that there are IPs in the DB as well. I currently have >50 hits (most of them me), so I would’ve guessed that generating output would be something less than 10 minutes. Regardless, this page has not changed. Now, before I select “Update Settings & Redraw” I can see the default, static map. That same map is also visible at www.{mywebsitehere}.com/cool, the page I was testing this feature out at.

Thanks for your efforts and time with this plugin and my questions!

Cheers!!

Yes, It’s working fine now, in all respects. Maybe it just wanted me to pester you one last time! :oD

Longitude = -121.86
Latitude = 36.60
My place color = #9900FF

I really appreciate your plugin and I really appreciate your patient willingness to help me sort out my problems. Thanks again.

So, are you @ Albert, Reutingen, or Waldstetten?

All best,

– Nelson

hey nelson,

no worries – cross posting happens. anyhow, seems to be working fine at my end (even with the big map). I think this happens only, if click on the image before your blog page is completely loaded, could that be? Than it’s not using the Lightbox-style zoom but loads the image only. The detailed stats work with a image map being defined when you blog loads (which is located in the footer of your page for better readability of the page HTML source). Obviously this can’t work if you load the image only.

hope this helps,
cheers,
-tmb

ps: what’s you long/lat values?
 
 
 
 
 

We cross posted. Sorry I didn’t see your #73 solution when I wrote my PS in #74.

Anyhow, it works! You’re a champ! Thank you so much!!!

One thing I notice, in the big map the cursor turns into a magnifying glass with a “+” in it and looses the capability (as it has in the small map) to click on a spot to see the hits detail. Is that normal?

Thanks again,

– Nelson

Maybe this will help. At least it’s what seemed to make a difference for me, finally.

All I needed to do is go into cPanel and phpMyAdmin for my database, open the wp_statpress table (my WP stats plugin is StatPress) and check the name for the field that holds my IPs (in my case the name is “ip”) and then went to my setting for “remote IP field name:” in the IPCCP Options admin screen and changed it accordingly (its default was “IP” so I reset it as “ip”). Then I had to click “Update Settings and Redraw”. Then I went back to my screen that was already displaying my map and click to “refresh”.

That seemed to take care of it for me. I hope it’s as straight forward for you.

Best wishes,

– Nelson

PS – tmb, I still would like to get the big map to pop up separately instead of at the bottom of my existing map page, if possible. See my #70 posting for my experience with zoom.js. (Thanks :o)

@Nelson: That Line14 thing was my mistake. I was using a different version on my server than you and totally forgot about it … LOL. I checked your version and here is what you have to change:
Line 193 change from
ipccp_zoomStyleSheet.setAttribute
('href','/wordpress/wp-content/plugins/ipccp/zoom/zoom.css');
to
ipccp_zoomStyleSheet.setAttribute
('href','/wp-content/plugins/ipccp/zoom/zoom.css');
and the similarly Line 242 from
ipccp_loadPreloader.src
= '/wordpress/wp-content/plugins/ipccp/zoom/ZoomProgress.png';
to
ipccp_loadPreloader.src
= '/wp-content/plugins/ipccp/zoom/ZoomProgress.png';
You can see the pattern: you have to get rid of the reference to the (in your case) not existing folder “wordpress” . Sorry about the confusion. Oh and what’s your Log/Lat-values? I’ll try it here to see what’s wrong there

@Poppa: Thanks for trying. What are those “generating messages appears at the bottom” you are referring to. Please post the output here so we can figure out what’s happening.

@Tim: Nelson posted his solution in nr.67 – it was a spelling mistake as the correct column was spelled “ip” and not “IP” (lower case letters!).

hope this helps,
cheers,
-tmb

Just wondering how Nelson fixed his problem with the IPs not being picked up.

All I am getting is:

Cluster Map Generation Started
0s >> Setting up GeoIP DONE
1s >> Fetching database entries (SELECT IP FROM wp_makingitupCounterize) DONE (5 entries)
1s >> finished fetching 0 entries
1s >> Finished with additional drawings
Done generating a new cluster map

I have checked the db and they sure look like IPs to me.

Yesterday, I was able to get IPCCP and counterize installed only to realize that there was a WHOLE lot more involved than typical plugins. After working through the MySQL documentation for a few hours and adding the IP_Counterize table to my established DB was I finally able to get counterize up and running.

And this is where I am stuck. Though the only IPs in counterize are mine (about 20) and IPCCP appears to be properly configured, it seems that IPCCP dumps whenever I select Update Options & Redraw. The message “Settings Saved” appears across the top of the page and generating messages appears at the bottom, nothing ever does show up, even after waiting about 10 minutes. Again, less than 40 hits according to counterize, so I would’ve guessed less than a minute to generate, as seen from the examples below.

Any ideas?

Cheers!!
PB

Thanks so much for helping with this. Yes, happily, my map is beginning to look like a mild case of measles. (Two spots so far in Deutschland, not sure which is yours. :o)

I looked in zoom.js and I didn’t see anything about the PlugInPath. Here’s what I have for zoom.js lines 11 to 24 inclusive:

var zoomAnimationWaitTimer = null, zoomAnimationTimer = null, zoomAnimationFrame = 0;
var isFirstZoom = true;

function ipccp_getScrollY() {

if (self.pageYOffset) { return self.pageYOffset; }
else if (document.documentElement && document.documentElement.scrollTop) { return document.documentElement.scrollTop; }
else if (document.body) { return document.body.scrollTop; }

return 0;

}

I tried adding “var PlugInPath = ‘/wp-content/plugins/ipccp’;” at line 14 but it didn’t seem to make a difference.

So, as close as I’ve gotten, I’m still not quite there yet. . .

Also, I’m curious about the “Add my place” function. I’ve specified both my longitude and latitude, but there is only a vertical line that runs up and down at my longitude. Nothing to indicate where my latitude is except that I have a red dot. But that’s from my own IP in the database, right? So I’m a bit confused here, too.

Thanks again, tmb, and cheers,

– Nelson

looks about right now. I see some smal dots all over you map (I definitely could see the place where I live ;) As far as the big image is concerned, there’s a pretty simple solution:
http://inrockland.us/wordpress/wp-content/plugins/ipccp/zoom/zoom.css not found
http://inrockland.us/wordpress/wp-content/plugins/ipccp/zoom/ZoomProgress.png not found

looks like you are not using the standard WordPress-folder. Instead it seems like you’ve got all your WordPress stuff in your main directory. But don’t worry! All you have to change is line 14 in your ipccp/zoom/zoom.js file from:
var PlugInPath = '/wordpress/wp-content/plugins/ipccp';
to
var PlugInPath = '/wp-content/plugins/ipccp';

at least I think this should do the trick :)
cheers,
-tmb

This is so, so COOL!

I’d still like to be able to have the large map pop out (like target=”_blank”) rather than appear at the bottom of the http://inrockland.us/visitors/ page as it does now. Any way to achieve this?

Thanks again, tmb, I’m very pleased with this. :o)

Thanks for having a look at this. OK, the first part of my problem is that I needed the “remote IP field name” to be specified as “ip” not IP”. Done.

Now I get…

Cluster Map Generation Started
0s >> Setting up GeoIP DONE
0s >> Fetching database entries (SELECT ip FROM wp_statpress) DONE (63 entries)
0s >> finished fetching 63 entries
0s >> Grouping entries by unique IPs
0s >> Grouping entries by unique IPs DONE (9 unique IPs)
0s >> Beginning with IP lookup
0s >> finished grouping IPs into 8 unique places
0s >> Rearranging some values DONE
0s >> Beginning to sort places by number of visits DONE
0s >> Beginning clustering
0s >> finished clustering into 7 cluster
0s >> Finished allocation 11 colors
0s >> Beginning to draw DONE
0s >> Finished with additional drawings
Done generating a new cluster map

…but I still have no clusters showing. Also, now it generates the large map at the bottom of the page where my small map is located ( http://inrockland.us/visitors/ ). I’d really like the large map to pop out a new page instead of showing up on the small map page. Any way to adjust settings for this?

Many thanks.

Eric and I continued the discussion on Flickr hosted pictures via eMail. Guess I should add a FAQ entry, huh? Currently it’s not possible to fetch EXIF from the web. ExZo does need “physical” access to the files. Though given the recent demand I’ll have a look into implementing that with the next releases. Though I must admit, I’m not really convinced yet, that this is reasonable…

cheers,
-tmb

thanks for trying the plugin. You got a couple things mixed up there. First of all, IPCCP should get it’s entries from a WordPress database containing IP numbers. In your case you are using the field “IP” in the table “wp_statpress”. Judging from here, it seems like even though there’s 42 entries in that table, none of them is a valid IP. Usually the first lines should looks something like:

1s >> Fetching database entries (SELECT IP FROM wp_Counterize) DONE (187430 entries)
[...]
15s >> finished fetching 187430 entries


As to logfiles: IPCCP can also fetch the IP numbers from logfiles. You will need access to your logfile on your server to do so (wouldn’t be much help to you if you used the vimagic-logfile ;-) As logfiles come in all kind of formates, parsing them is somewhat of an issue. The PHP/rexp-savvy may use their own logfile filter if the build in one doesn’t work properly. In your case it’s probably best to untick the “include logfile” and leave the two fields in the settings blank. Especially if you’ve entered anything in the second field that may explain why all your 42 (possibly correctly fetched IPs) get rejected.

let me know how it went,
cheers,
-tmb

ps @Paradox: neat idea, even though I’m not much of a Google fanboy, I admit there’s some charm in the idea. I’ll keep it in mind for a future release (see ToDo list).

Dazed and confuzed — but hopeful! :oP

Here’s the Generating New Cluster Map feedback:

Cluster Map Generation Started
0s >> Setting up GeoIP DONE
0s >> Fetching database entries (SELECT IP FROM wp_statpress) DONE (42 entries)
0s >> finished fetching 0 entries
0s >> Finished with additional drawings
Done generating a new cluster map

Thanks for any guidance.

– Nelson

how do you know you are running PHP5? Every time that error occurred, it was due to PHP4 being used. Sometimes there’s PHP4 and PHP5 running on the same machine. Since most of those times PHP4 gets called by “php” while PHP5 is being called by “php5″ – so are you absolutely positive that your blog is running on PHP5?

cheers,
-tmb

don’t worry about the emails – I’m happy to help. I found your problem: you are using “Counterize II” which as of version 2.13.0 does NOT store IP numbers anymore
(see counterize.php:
New in 2.13.0
- no more ip-logging (this is illegal in some countries e.g. Germany)
counterize stores only a small hash to distingiush between two users
and to get information about the user count)

Hence you can not use IPCCP. You need either “Counterize”
http://andersdrengen.dk/projects/counterize/ or use an older version of “Counterize II” if you want to use IPCCP.

cheers,
-tmb

I’m sending in attachment a zip file with my folder ipccp into my blog and a
screenshot of my configuration (screenshot_Eduardo.jpg).

Please, Can you help me? This is my first experience with IPCCP and Blogs
and I have too many doubts.

Others information that I think are important:

- WordPress: 2.5.1 (Portuguese)
- My Themes doesn’t use widgets

Thanks a lot,

0s >> Loading GeoIP into memory DONE
1s >> Fetching database entries (SELECT IP FROM wp_Counterize) DONE (187430 entries)
[...]
15s >> finished fetching 187430 entries
15s >> Grouping entries by unique IPs
16s >> Grouping entries by unique IPs DONE (37708 unique IPs)
16s >> Beginning with IP lookup
[...]
194s >> finished grouping IPs into 9748 unique places
194s >> Rearranging some values DONE
194s >> Beginning to sort places by number of visits DONE
194s >> Beginning clustering
[...]
573s >> finished clustering into 1492 cluster
573s >> Finished allocation 12 colors
573s >> Beginning to draw DONE
582s >> Finished with additional drawings
Done generating a new cluster map

Important is the line “finished fetching 187430 entries” which in your log reads “finished fetching 0 entries”. Basically this means, that IPCCP couldn’t find any IPs in your database. I’ve attached a special debugging version for you – try this one. After init and loading it should say something like:

1s >> Fetching database entries (SELECT IP FROM wp_Counterize) DONE (187432 entries)
5000 database entries processed (5000 relevant IPs found)

Especially the number in the brackets is important. It givens the number of relevant IPs found in the last verified IPs. Let me know how your output looks like. And just to make sure: You are using Counterize and not Counterize II for example?

Thanks a lot for your help, but I can’t see the map with marks. Look this
message:

Cluster Map Generation Started
0s >> Loading GeoIP into memory DONE
0s >> Fetching database entries (SELECT IP FROM wp_Counterize) DONE (6282
entries)
0s >> finished fetching 0 entries
0s >> Finished with additional drawings
Done generating a new cluster map

And nothing to do! What’s happened? I’ve been try to see the map in FireFox
and IE 6!!!

Tks,

as far as programming goes, it’s a rather simple feat. but as I’ve written in the ToDo-List (last item), all I’m waiting for are some license free maps (or someone that is willing to donate a map to the cause). Or do you just want to “crop” the existing map? Hmm…

cheers,
-tmb

Thanks,,

@Yogie: I’m on it. With version v0.b6.7 you can enter any WordPress-relative path (starting with /wp-content/). I’ve got no clue how those gallery plugins manage their files but I’m assuming, they are within wordpress/wp-content/ somewhere. I’ll do some more checking and release the new version later today.

cheers,
-tmb

The reason for having EXZO working with one of the Gallery plugins is the easy administration of a lot of pictures, but they do have only limited to none support of the EXIF datas…

Another suggestion for your next release: Instead of only typing token in a post/page, I think adding capability of integrating the plugin into template would add more flexibility (less work for the user … more works for you surely :)). I know a site that does it, but I don’t know how the owner did it. He just said that he used image (post) ID for extracting exif data.

Thank you

Thanks for trying the plugin and for the feedback. If I’m not mistaken, there is no “camera owner tag”. The exif specification states on page -23- that the artist tag is to be used (ExZo token %ARTIST%):
Artist
This tag records the name of the camera owner, photographer or image creator. The detailed format is not specified, but it is recommended that the information be written as in the example below for ease of Interoperability. When the field is left blank, it is treated as unknown.

Ex.) “Camera owner, John Smith; Photographer, Michael Brown; Image creator, Ken James”
Tag = 315 (13Bh)
Type = ASCII
Count = Any
Default = none

As for your second question: I’ve never used either myGallery nor NEXTGen. Would it be enough, if one specifies the image path for ExZo? That could be implemented rather easily.
cheers,
-tmb

I’m missing the camera owner EXIF tag….

Cheers

Yogie

is it possible to add support for images uploaded by other plugins instead of the build in media data base of WP? For example myGallery or NEXTGen Gallery?

Cheers & Thanks
Yogie

thanks for the feedback. The problem you have is a simple one: GeoIP rejected a faulty lookup call. Somewhere in your database the string “4ce21b21887f050e” got entered for an IP number (or maybe you’ve got the wrong database/table/key combination?). Anyway so far IPCCP assumed to receive only correctly formatted IPs. Big assumtion coming from a lazy programmer ;) It should be fixed now.

While I was at it I also speeded things up somewhat major. Hence the new version is recommended for everybody.
cheers,
-tmb

thanks

First of all, congratulation to Mr.Thomas M. Bösel for this perfect plugin. I need a help to use the IP City Cluster. I installed in my blog, but there are an erros. Look at below:

//////////////////////////////////////
PHP Fatal error: Uncaught exception ‘Exception’ with message ‘Invalid IP address: ’4ce21b21887f050e” in E:\home\nandagaucha1\Web\wp-content\plugins\ipccp\GeoIP\GeoIP.php:507 Stack trace: #0 E:\home\nandagaucha1\Web\wp-content\plugins\ipccp\GeoIP\GeoIP.php(538): Net_GeoIP->lookupCountryId(’4ce21b21887f050…’) #1 E:\home\nandagaucha1\Web\wp-content\plugins\ipccp\ipccp.php(721): Net_GeoIP->lookupCountryName(’4ce21b21887f050…’) #2 E:\home\nandagaucha1\Web\wp-content\plugins\ipccp\ipccp.php(1238): WpIPCCP->_recluster() #3 E:\home\nandagaucha1\Web\wp-content\plugins\ipccp\ipccp.php(1329): WpIPCCP->_options_form() #4 [internal function]: ipccp_options_form(”) #5 E:\home\nandagaucha1\Web\wp-includes\plugin.php(311): call_user_func_array(‘ipccp_options_f…’, Array) #6 E:\home\nandagaucha1\Web\wp-admin\admin.php(55): do_action(‘opcoes_page_ipc…’) #7 E:\home\nandagaucha1\Web\wp-admin\options-general.php(2): require_once(‘E:\home\nandaga…’) #8 {main} thrown in E:\home\nandagaucha1\Web\wp-content\plugins\ipccp\GeoIP\GeoIP.php on line 507
//////////////////////////////////////

What’s wrong? It’s look like that the field IP in database is not correspond as the same in GeoIP. I saw here (43rd Post) that Erik had the same problem, but I cound not see the solution.

Thanks a lot

Eduardo

I’ve uploaded a new version:
@Matt: For one I fixed the iPhone issue. Actually the plugin was already iPhone compatible! Unfortunately no Exif-stuff was showing, because most fields where empty (see here for a list of iPhone-exif) which violated a minimum-available-amount-of-exif-before-showing-loop. Anyway, it should be fixed as you can see here.

@guzfrie: I’ve also fixed your Date/Time problem. Just beware, that %DATETIME% my not work with most pictures. To be sure use either

• %DATE_TIME%,
• %DATE_TIME_DIGITIZED% or
• %DATE_TIME_ORIGINAL%.

While I was at it, I’ve also added every other PEL-token. You’ll now be able to add GPS info and other funny informations too.

cheers,
-tmb

I’m guessing you haven’t deactivated/reactivated the plugin (which is recommended after an update)? that should fix the first problem. as for the date/time tag problem I’ve got no clue. send me a picture of your’s and I’ll have a look at whats happening.

cheers,
-tmb

1) Although it works, the updated exzo.php breaks exzo option page in administrator panel. The message appears is:
Warning: Missing argument 5 for WpExZo::_exzo(), called in /…. /plugins/exzo/exzo.php on line 753 and defined in /…. /plugins/exzo/exzo.php on line 366

2) %DATETIME% token doesn’t result any date for my photo. Although I only use a pocket camera, I’m sure that the date when the photo is created should be there.

I want to use this plugin indeed, since, due to its flexibility, it’s the best exif plugin I know .

thanks for trying the plugin. it’s not possible with the current version. I’ve whipped up some code that includes a new token. Using [exzo img="image.jpg"] you’ll now be able to show the exif data only. Have a go at the new version and let me know how it works for you.

cheers,
-tmb

ps: I might do a spin-off plugin some time for that. but for now you have to go with the full functionality and use the currect token depending on whether you want to see the image or not.

perfect.

regards

sorry for the late reply. the plugin works as a filter. if it got installed properly and if it’s running in simply substitutes the token text. now if it’s not working for you, most likely it
1) didn’t get installed properly (which is unlikely if settings and stuff works)
2) the token text is not spelled correctly
3) some other plugin is interfering.
what other plugs are you using?

cheers,
-tmb

I’ve gone into the settings, and it shows the dummy image. I’ve even put in the file name above, and it displays the correct info & EXIF within the preview pane.

For some reason, it seems WP is just showing that as text, not using it as a plugin.

thanks for the feedback. I’m running WP2.5.1 so it’s no WordPress version issue (I think). The plugin is installed and activated? Have you checked the plugin settings page (Settings -> ExZo)? Is the sample picture showing?

cheers,
-tmb

[exzo url=”” title=”frontier drinkin’”]bulleit-web.jpg[/exzo]

It doesn’t matter if I put it into the ‘visual’ or ‘code’ post editor tab, I still get the text displayed just like it is above, not a picture.

Any ideas? The plugin has installed ok.

Does anybody know if tis script is compatible with WordPress 2.5?

Thanks in advance for any help on this!

by default it’s the folder “random_header_images” right next to your wordpress directory. But you can change that to any folder anywhere you like (change the $folder in line 45)

cheers,
-tmb

is it not working with 2.5? what’s the error message?

thanks for the feedback,
-tmb

This is some pretty cool thing you got going here. Gonna check out the remaining site pages to see if there are any updates. ;)

Cheers! :)

$im_clustered=$this->_LoadJPG($this->loadFile);

Which I felt strange. When I commented out this line, the program “works fine” until the image processing part, which means the data retrieving and clustering went on without problem. I’ll try my best to debug this.

Also the script complained “Call to undefined function utf8_encode()”, the server’s php5 functionality seems to be very crippled.

Anyway, the error message is gone and I can activate the plugin. But now at the Options screen, when I click Update Settings and Redraw, it never gets pass
0s >> Setting up GeoIP

Has this problem occured to anyone else? (I tried Higher performance and Memory efficient)

Version 4 uses php.ini and version 5 uses php5.ini, so maybe it’s calling PHP version 4 when it should do 5?

It’s a virtual private server running Linux/Apache (sorry I don’t know the versions)

as written in the FAQ above, this error happens whenever you try to run the plugin on an PHP4 Server. Are you positive your site is running PHP5 or better?

cheers,
-tmb

I like your speaker setup! I’ve got B&W’s in front and center and the KEF eggs on the ceiling for rear speakers.

I notice you wrote the EXIF plugin for WordPress, I wrote one for BlogEngine. Funny world…

PS Firefly rocks!

sorry – no search engine queries found. [wrong or empty table: wp_Counterize_Referers » name ?]

Anything else I can do wrong?

These are all my settings:
http://img205.imageshack.us/img205/2748/60635472vc1.jpg

Greets..

Counter table name: wp_Counterize_Referers
Referer field name: name
Local Counter table name: wp_Counterize_Pages
Url field name: url

i’m not sure on the id, try “id” or ask the developer of Counterize II

Unique ID name: id

Include Local Searches:
Counter table name: xxxxx Local Counter table name: xxxxx
Referer field name: xxxxx Url field name: xxxxx
Unique ID name: xxxxx

Greets..

you should change the entries to the values you see under Requirements
» Counterize II [Table/Key: "wp_Counterize_Referers"/"name", Local Table/Key: "wp_Counterize_Pages"/"url"]

cheers,
-tmb

————————————–
http://www.dasofte.com